The Size Guide: Find Your Fit
Rings
Method 1: Use our printable ring sizer
This is the best at-home method if you don’t already know your ring size.
Download our PDF ring sizer here and print it at 100% scale (actual size, no scaling).
Important: On your printer settings, make sure the page scaling is set to “Actual size” or 100%—not “Fit to page” or “Scale to fit.”
Different printers and devices may label this setting differently, but the goal is to ensure the sizing remains accurate when printed. You can confirm the scale by measuring the 30mm or 1” test line included in the PDF.
Method 2: Measure the internal diameter of a ring you already own
- Find an existing ring that fits your desired finger.
- Measure the internal diameter of the ring in millimeters (mm).
- Use the below chart to determine your ring size.
Method 3: Measure your finger circumference
- Wrap a thin piece of paper, or a non-stretchy string, snugly around the exact finger you’ll wear the ring on and where you’d like your ring to be on the finger. (Measure a few times for accuracy, as ring size can change slightly throughout the day due to changing temperature or activities, and measure tightly.)
- Mark the spot where the papers or string overlap.
- Measure the distance with a ruler in mm - this is your
circumference. - Use the below chart to determine your ring size.
Tip: To get the most accurate results, don’t rely on just one method. Compare your size using several methods and cross-check them against each other. For complete certainty, visit a jewelry store and have your finger professionally measured.
| DIAMETER (MM) | CIRCUMFERENCE (MM) | US / CANADA | EUROPE | SWITZERLAND | HK |
|---|---|---|---|---|---|
| 14.1 | 44.3 | 3 | 44.5 | 4 | 6 |
| 14.3 | 44.9 | 3.25 | 45 | 5.25 | 6.5 |
| 14.5 | 45.6 | 3.5 | 45.5 | 5.75 | 7.25 |
| 14.7 | 46.2 | 3.75 | 46.5 | 6.5 | 7.75 |
| 14.9 | 46.8 | 4 | 47 | 7 | 8.25 |
| 15.1 | 47.4 | 4.25 | 47.5 | 7.75 | 9 |
| 15.3 | 48.1 | 4.5 | 48 | 8.5 | 9.5 |
| 15.5 | 48.7 | 4.75 | 49 | 9 | 10 |
| 15.7 | 49.3 | 5 | 49.5 | 9.5 | 10.5 |
| 15.9 | 50 | 5.25 | 50 | 10 | 11.25 |
| 16.1 | 50.6 | 5.5 | 51 | 10.5 | 11.75 |
| 16.3 | 51.2 | 5.75 | 51.5 | 11.5 | 12.5 |
| 16.5 | 51.8 | 6 | 52 | 12.75 | 13 |
| 16.7 | 52.5 | 6.25 | 53 | 13.5 | 13.5 |
| 16.9 | 53.1 | 6.5 | 53.5 | 14 | 14.25 |
| 17.1 | 53.7 | 6.75 | 54 | 14.5 | 14.75 |
| 17.3 | 54.3 | 7 | 55 | 15.25 | 15.25 |
| 17.5 | 55 | 7.25 | 55.5 | 15.75 | 15.75 |
| 17.7 | 55.6 | 7.5 | 56 | 16.5 | 16.5 |
| 18.0 | 56.5 | 7.75 | 56.5 | 17.5 | 17 |
| 18.2 | 57.2 | 8 | 57 | 18.25 | 17.5 |
| 18.3 | 57.5 | 8.25 | 58 | 18.75 | 18.25 |
| 18.8 | 59.1 | 8.75 | 59 | 19 | 19.5 |
| 19.0 | 59.7 | 9 | 60 | 19.5 | 20 |
| 19.4 | 60.9 | 9.5 | 61 | 20.75 | 21.25 |
| 19.8 | 62.2 | 10 | 62.5 | 21.75 | 22.25 |
Bracelets
Our bracelets come in the following lengths:
- 15cm / 5.9”
- 15.5cm / 6.1”
- 16cm / 6.3”
- 16.5cm / 6.5"
- 17cm / 6.7”
- 17.5cm / 6.9”
STEP 1: Figure out your wrist circumference
- Wrap a soft measuring tape snugly around your wrist where you’d normally wear a bracelet.
- If you dont have a measuring tape, wrap a piece of (non-stretchy) string or paper snugly around your wrist and mark where it overlaps. Then measure the string or paper with a ruler.
- Note the measurement.
Tip: Your two wrists may differ slightly in size.
Step 2: Figure out your bracelet length
Decide which fit style you would like and then add the corresponding measurement. From there, find the closest tinxx size for your best fit:
| FIT STYLE | BRACELET SIZE CALCULATION |
|---|---|
|
Snug Fit A close-to-the-skin fit that hugs your wrist without much movement. |
Add 1cm / 0.4” to wrist circumference and find the closest tinxx size. |
|
Standard Fit A relaxed, everyday fit with slight movement. |
Add 1.5cm / 0.6” to wrist circumference and find the closest tinxx size. |
|
Loose Fit Drapes freely on the wrist with noticeable movement. |
Add 2cm / 0.8” to wrist circumference and find the closest tinxx size. |
Alternatively, measure the length of a bracelet you already own that fits the way you like.
Bangles
Our bangles come in the following sizes (inner circumference):
- 15cm / 5.9”
- 15.5cm / 6.1”
- 16cm / 6.3”
- 16.5cm / 6.5"
- 17cm / 6.7”
- 17.5cm / 6.9”
Step 1: Figure out your wrist circumference
- Wrap a soft measuring tape snugly around your wrist. To ensure a comfortable fit, we recommend measuring the thickest part of the wrist, usually the wrist joint.
- If you don't have a measuring tape, wrap a piece of (non-stretchy) string or paper snugly around your wrist and mark where it overlaps. Then measure the string or paper with a ruler.
- Note the measurement.
Tip: Your two wrists may differ slightly in size.
Step 2: Figure out your bangle size
Decide which fit style you would like and then add the corresponding measurement. From there, find the closest tinxx size for your best fit:
| FIT STYLE | BANGLE SIZE CALCULATION |
|---|---|
|
Standard Fit A neater fit that stays in place, with minimal sliding. |
Add 1cm / 0.4” to wrist circumference and find the closest tinxx size. |
|
Loose Fit Allows the bangle to move up and down your wrist more freely. |
Add 1.5cm / 0.6” to wrist circumference and find the closest tinxx size. |
Necklaces
Our necklaces come in the following sizes:
- 14" / 35.5cm: wraps closely around the neck
- 16"/ 40.5cm: wraps loosely around the neck
- 18” / 45.5cm: sits on the collarbone
- 20” / 50.8cm: sits just below the collarbone
Please note: This visual is for guidance only. Actual placement may vary depending on your neck, height, and body proportions.
Option 1: Measure Your Preferred fit
- Using a Measuring tape: Wrap a flexible measuring tape around your neck where you’d like the necklace to sit and note the measurement.
- Using a String: Drape a piece of string around your neck and adjust it until it falls at your preferred length. Lay the string flat and measure it with a ruler.
Tip: For a choker fit, add about 2 inches (5 cm) to your neck diameter for comfort.
- Alternatively, use a measuring tape or cut a piece of string to the length of a tinxx necklace size to try it on and visualize the fit before ordering.
Option 2: Measure an Existing Necklace
Measure the length of a necklace you already own that fits the way you like.
FAQ
Do you offer more sizes than what's listed on your website?
Due to the high variance in gold and diamond usage across sizes, we list a limited selection on our website. However, if you’re interested in a different size, please contact us for a tailored quotation.
Do you offer resizing?
Unfortunately, resizing is not possible once your jewelry has been made, as each piece is custom-made to order. Please ensure you select the correct size and are sure about your choice before placing your order. If you need assistance, don't hesitate to reach out to us before confirming your purchase.